Hot runner nozzle heaters, hot runner heaters for manifold, plastic injection mould heaters advantages:
High thermal conductivity: Negative tolerance of heater inner diameter,gapless,fit closely
Fast heating: Small power loss +high power heater,freely distribute power setting
Small capacity: Thin wall design,wall thickness 2.0-3.0mm
Easy maintenance,time saving,cost effective: Cut out design,easy install and uninstall by single circlip pliers
Long lifetime: Groove profile design,maximum heating area,quickly heat conduct,lower heating load,no circuit inside, no resistance wire interiace inside,no short circuit dange
Safe: Double head design, single resistance wire inside, thick insulating layer, no current leackage.
Power saving: Groove profile design ,66% effective contact area,small power loss(spring heater effective contact area is around 25%-33%)
High efficiency: Fit closely + high power,short heating time,short injection cycle time
Cross Section | ●:Φ1.4/Φ1.8/Φ1.6/Φ2.0/Φ2.2/Φ2.5/Φ2.7/Φ3.0/Φ3.3/Φ3.8/Φ4.0/Φ4.2/Φ5.0/Φ5.5 | |
▆:1.2*4.2/1.3*2.1/1.4*2.4/1.5*2/1.5*2.2/1.6*2.4/1.8*3.2/2*4/2.2*4.2/2.2*4.7/2.3*4.3/2.5*4/2.7*4.2/2.7*4.5/3*5/4*6/4.2*6 | ||
█:3*3/3.2*3.2/3.4*3.4/3.5*3.5/4*4/5*5/6*6/8*8 | ||
Minimum internal coiling Φ | 10mm | |
Voltage | 12V- 400V | |
Wattage tolerance | ±10% | |
Material | SS304/SS321/SS310/SS316 (Customized) | |
Resistance | ±10% | |
Dielectric strength | 600V 800V 1000V | |
Insulation(cold 1000V) | ＞10 MΩ | |
Leakage current(cold) | ＜0.5mA | |
Max power density | 10W/cm² | |
Heating length tolerance | ±2.5% | |
Surface treatment | Sandblasting, black, polish, green | |
Maximum working temperature allowed on sheath | Max.750℃ / 1380°F | |
Build-in Thermocouple | Type K/ J/ E | |
Standard supply 1000mm PTEE insulated nickel lead wire | ||
| Material of lead wire: Fiberglass, Kevlar, Telfon, Silicone Rubber, Metal braided, SUS armoured. | ||
Hot Runner System Coil Heater hot system application
Drawings
Products show
Shipment
What information should i let you know once i want to make a inquiry?
1. The drawings ( PDF,CAD or 3D )?
2. The voltage, power, shape, tube diameter
3. The surface treatment requirement.
4. How many pieces do you need?
FAQ
1. Q: What is The Process Of an Order?
A: Send Your Detailed Request→Feedback With Quotation→Confirm Quotation & Make Payment→Make Size Drawing For Approval→Make Production→Production Test→Sample Test(Approval)→Mass Production→Quality Checking→Delivery→After Service→Repeat Order...
2. Q: How do you ship the goods and how long does it take to arrive?
A: Airline and sea shipping also optional. Shipping time depends on distance.
Hot Tags: hot runner system coil heater, China, manufacturers, suppliers, factory, customized, Coil Heater With Thermocouple, Coil Nozzle Heater, Hot Runner Coil Heater with 5 Pin Plug, Hot Runner Coil Heaters Pressed in Brass, Hot Runner Coil Micro Tubular Heater, Micro Nozzle Coil Heater