Flat Ceramic Heating Element
Product introduction
Infrared ceramic heater are widely used in pre-heating of plastic sheets for vacuum forming & thermoforming, drying paints, lacquer & varnish curing, drying printing inks, drying textiles, activating adhesives, removing surface water from objects or moisture removal from fabric and paper, animal husbandry and rearing.The ceramic IR heaters are highly efficient.Ceramic infrared heater offers precise targeting and control with minimal peripheral heat. It is possible to apply heat only where and when it is required. The energy in an infrared heater is transmitted at the speed of light from the element to the product. A constant rate of heating is obtained because the source temperature is normally much higher than that of the product even at the end of the heating cycle.
Main technical parameters and performance of the product:
1, radiation surface temperature unevenness: ≤ 15%
2. The matrix bending strength is 440Kg/cm2;
3, power error: ≤ 5% under rated working voltage
4, cold insulation resistance: 500V megohmmeter > 2mΩ
5, thermal insulation resistance: 500V megohmmeter > 0.5mΩ
6, the service life> 3000 hours
Size (mm) | Shape | Power ( W ) |
245 x 65 | curve | 250-1000W |
240 x 60 | curve | 250-1000W |
125 x 65 | curve | 200-500W |
120 x 60 | flat | 100-350W |
120 x 60 | curve | 100-350W |
120 x 120 | flat | 100-800W |
120 x 120 | curve | 100-800W |
300 x 300 x 16 | flat | 800-1500W |
240 x 160x 16 | flat | 600-1000W |
Ø70 | Round | 100-200W |
Ø100 | round | 200-330W |
Ø140 | round | 300-400W |
125 x 125 | flat | 400-800W |
Uses: It is widely used in food, medical, electronics, plastics, wire and cable, automotive packaging and other industries for baking or temperature setting.
Product picture show
How to produce the ceramic infrared heater?
Test room show
Packing details
Shipment ways
Our Service
As a manufacturer with 12years of L type Cartridge heater. R&D experience in China, we would like to offer any support you need as following:
1) Immediate reply to your inquiry.
2) Exact recommend of our machine for the job you do.
3) Detail information of our products, and our company if you need.
4) Best quotation.
5) Immediate answers to your questions about our produts.
6) Technical support, or alternative accessories if necessary.
FAQ
1. Q: Are you a factory or trading company?
A: We are manufacturer.
2. Q: Where is your factory located?How can I wisit there?
A: Our factory is located in shenzhen City, China.
3. Q: How to proceed the order if I have logo to print?
A: First, Artwork for visual confirmation, and next is Sample picture or sending sample to you for confirmation, finally we will go to mass production.
Shenzhen Suwaie Technology Co., Ltd. Focus on the production of Flat Ceramic Heating Element. Our company has professional equipment and engineers to provide the production and service of Flat Ceramic Heating Element.
Hot Tags: flat ceramic heating element, China, manufacturers, suppliers, factory, customized, ARC Ceramic Element Heater, Far Ceramic Infrared Heater, Ceramic Heat Emitter, Curved Rectangle Ceramic Infrared Heater, Trough Infrared Ceramic IR Heat Emitters, Ceramic Far Infrared Heating Emitter for PET Animals