Cast Aluminum Heater

product manual:

The cast aluminum electric heater is a tubular electric heating element as a heating element, and the element is bent and formed into various shapes into a mold, and has a round shape, a flat plate, a right angle type, an air cooling, a water cooling, and other special shapes. After finishing, it can be closely attached to the heated body, and the surface load can reach 5-7W/cm2. The maximum use temperature is 500 degrees. It has a fast heating, uniform heating, good thermal conductivity and long service life. This product is currently one of the ideal heaters at home and abroad. For heaters with high unit surface load requirements, according to user requirements.

Precautions for use:

1. Must be installed firmly before use, not loose.

2. The voltage used should not exceed 10% of the rated voltage and should be effectively grounded.

3. The electric heating element has been inspected and dried in detail. For safety reasons, it is necessary to check again before use, whether it is leakage or short circuit.

4, electric heating components should be placed in a dry place, not damp, such as long-term use, insulation resistance against 5Mω, should be placed in a dry box for 2-3 hours, temperature 150-200 degrees.

5, working environment: relative humidity is not more than 95%, no explosive ~ flammable and corrosive gases.

This service life is long, and the main technical indicators are implemented according to JB/T2379-93 "Metal tubular electric heating element" and JB/T4088-99 "Daily tubular electric heating element".