How to deal with electric tubular heater leakage
Electric ubular heater
Reasons for leakage of electric ubular heater
1. Missed ground wire;
2. The insulation of the electric ubular heater is damaged (this may be the problem of insulating magnesium oxide powder, or the insulation of the joint)
3. The electric ubular heater is burnt out and short-circuited with the cup body;
4, improper cleaning, water hits the stainless steel electric ubular heater terminal;
5. The circuit wire comes off and touches the cup body;
6, electric heating socket or power plug is too dirty;
7, the water quality is too poor, the water pollution is serious;
Electric ubular heater solution
1. Connect the ground wire as required and check whether it is correct;
2. Check and repair and recommend replacement if such an incident occurs;
3. The electric ubular heater is damaged. Replace the electric ubular heater with the same specification;
4. Correctly clean and dry the stainless steel ubular heater;
5. Check the missing wires and resolder them firmly;
6. Clean and dry properly;