Introduction of titanium tubular heater
The material of the titanium tubular heater is as its name implies, and the titanium tube is used as a metal sheath. Titanium can effectively prevent weak acid erosion, so the titanium electric tubular heater has a certain anti-corrosion function, which is suitable for the heating of weak acid corrosive liquid. The most used one is electrolytic cell heating.
advantage:
1. High heating power, high thermal efficiency, not limited by the depth of the tank;
2. Easy to use power line heating and achieve three-phase power balance;
3. Easy installation and fewer leads;
4. Compared with the special-shaped thin tube electric heater, the electric heating wire can be replaced.
Installation Precautions:
1. The electric tubular heater(heating tube) is generally distributed along the length (or width) of the tank, and is evenly distributed on the side (or both sides) that is not caught by the workpiece during operation. It is installed against the tank wall. In the electrolytic tank, it can be placed Between the plate and the groove wall.
2. The electric tubular heater (heating pipe) can be fixed by the groove side, the wall of the groove, and the pole hanging, etc. The wiring installation plate is used to match the support with a drill, and the bolts are fastened.
3. Pay attention to the three-phase balance when wiring, and do not connect the 220V or 380V power supply incorrectly.
4. Safe grounding through earth leakage switch.
5. Keep a certain distance between the heating element. If they are close to each other, they will easily overheat and burn out.
Titanium is a metallic element, gray, and its melting point is as high as 1668 ± 4 ℃. Titanium has a density of 4.506-4.516 g / cm3 (20 ° C). Titanium is not magnetic. Titanium can change the surface of titanium to colorful by changing temperature or voltage. Titanium has good plasticity and can process various shapes. Can burn in nitrogen, high melting point. Blunt titanium and titanium-based alloys are new structural materials, mainly used in the aerospace industry and the marine industry. Titanium electric heating tube is an emerging industry. Titanium electric heating tube will become a new economic breakthrough point in the jewelry industry. Because titanium is a new type of jewelry material, plus it is "biological". In the human body, it can resist the corrosion of secretions and is non-toxic. It is adaptable to any method, and it will not cause any harm to the human body when it comes into contact with the skin.
Titanium has a small specific gravity and is widely used in heating water, nitrate solution, acid solution, and alkali solution. Practice has proven that titanium has high efficiency and long life in the production of anticorrosive equipment. Greatly improve the efficiency of the electroplating industry. The effective length of the heating element must be fully immersed in the liquid.
Titanium heating tube has the characteristics of simple structure, high mechanical strength, high thermal efficiency, safety and reliability, easy installation and long service life. Widely used in various highly corrosive liquids.