Oil drum heater use environment
The oil drum heater is used for heating, heat tracing and heat preservation of the tank body, pipes, and other barrel equipment. It can be wound directly on the heated part for easy installation and disassembly. It is especially suitable for the dissolution of paraffin and the waxing of oily objects in winter. The surface temperature when the heater is suspended in 20 degrees of still air is one hundred and fifty degrees Celsius. Depending on the environment used, the temperature of the heater may vary depending on the material and shape of the heated object. The barrel heating belt may have special specifications. Produced as required. Silicone rubber drum heaters can be used for heating and insulation of pipes, tanks, cabinets and cabinets. Structure performance of oil drum heater The product heating element adopts nickel-chromium alloy wire, heating block, high thermal efficiency and long service life.
The double insulation of the moisture-proof silicone rubber and the alkali-free glass fiber makes the insulation performance of the heater more reliable. The aluminum plate assists in heat dissipation, which increases the thermal efficiency of the heater and extends its service life. Easy to install. Precautions for the oil drum heater: Remember to insert the wrong power supply and use the voltage correctly. The optimum heating temperature is 50-180 °C, the temperature is not too high, and the temperature is too high, which will affect the service life. A temperature sensor is installed on the surface of the heater, and the temperature is directly controlled by temperature adjustment (generally 30-150 degrees).
It is suitable for heating and heat preservation of 200 liter standard oil drums, and can also be used for heating of other barrels and insulation of valves. Wrap the product on the surface of the barrel through the surface fasteners and springs to ensure that the spring and the iron buckle are firmly connected. Connect the plug configured with the product to a 220V AC power supply. Control the temperature adjustment: press the SET button to flash to display the control temperature, then press the ↑ or ↓ button to adjust the value to the desired temperature, and the thermostat automatically memorizes the storage. Press the SET button to exit the adjustment status display library temperature; if you do not press any button, the measurement library temperature will be restored after ten seconds. Work indicator: During the heating process, the work light is on; the constant temperature work light is off. After heating is complete, disconnect the plug from the power supply.
A drum heater with a digital thermostat is provided to facilitate the removal of liquid and coagulum in the barrel by heating, such as adhesives, grease, tar, paint, paraffin, oil and various resin materials in the barrel. The barrel is heated to make the viscosity drop evenly, reducing the pump's power. Therefore, this device can be used all year round without being affected by the season. As a partner of many well-known brands, EHSY Western Region guarantees the occupational health, safety environment and bright future of your employees with its excellent quality and service. It is suitable for fluids with low freezing point such as grease, asphalt, paint and paraffin products. It solves the difficulty of suction and discharge when the weather is cold. And the price is low, the temperature control range: 50--300 degrees. The function of the hob is to withstand the load of the lining and the workpiece and the side thrust of the supporting arch (refer to the box furnace vault).
Silicone rubber heaters are used at temperatures ranging from -60 ° C to 250 ° C. The voltage can be customized according to user requirements, the highest power density is 2.1W/cm2. The heating core has two kinds of high electric heating wire and metal film. The electric heating core made of the film can make the heater with high power density and has excellent rapid heating function.
The silicone rubber heater is in the form of a sheet which has excellent flexibility and can be in full contact with the object to be heated. In this way, heat can be transferred to where it is needed.
Features:
(1) Various shapes and sizes can be customized according to customer requirements.