Flat Hot Coil Heater

Flat Hot Coil Heater

Introduction

Hot runner heaters also known as cable heaters can be formed to a variety of shapes as require by its many applications. Frequently though, hot runner heaters are configured as small diameter, high performance nozzle heaters that are fully annealed.

Hot runner heaters are used on injection molding machine nozzles and sprue bushings supplying 360º of heat with optional distributed wattage models also available. Hot runner heaters are also used as cartridge heaters where irregular size bores are found. A straight, round cable heater can snake through a sealing bar in packaging equipment installations

Custom wound from straight stock for same day shipments

Flexible cold section

Higher watt density than a cable heater

Resistance wire centered for more repeatable heat profile

Sealed transition head for moisture resistant applications available

Thermocouple: Integrated type J or type K

Profile: 2.5mm(.098”) Thick X 3.4mm(.134”) Wide

Maximum Sheath Temperature: 1382 deg. F

Sheath Material: Cr-Ni Steel

Maximum Total Straight Length: 3000mm (118.11”)

Length Tolerance: Heated +/-1%; Unheated +/- 2.5%

Maximum Voltage: 250VAC

High Voltage Stability: 800 VAC

Wattage Tolerance: +/-10% (contact hotset for special)

Minimum Bending Radius: 6.35mm(.250”)

Watt Density: 38.7 Watts/In2

Insulation Resistance: >=5M Ohm @ 500 VDC (cold)

Leakage Current: <= 0.1mA @ 253 VAC (cold)

Length of Unheated Zone: 65mm(2.56”); 25mm(1.00”) Transition Head

Standard Connection from Stock: 48” Teflon Leads.

Specification

Applications of Hot Runner Coil Heater:

1. Caustic Cyanide used in gold processing
2.Caustic solutions Detergent
3.Sterilizing equipment
4.Plastic processing&packaging machinery
5.Ovens&dryers
6.Dies&Tools
7.Water& Oil heating appliances
8.Vending machines
9.Medical equipmentstailed information about what you need.

Order Guider

1.Cross Section

2.Circles / length/ diameter

3.Voltage

4.Wattage

5.Quantity

Flat Hot Coil Heater products picture show

Type K Coil Heater Process show

Hot Runner Mold Heater Test room show

Packing and shipment ways

Our Service As a manufacturer with 12 years R&D experience in China, we would like to offer any support you need as following:

1) Immediate reply to your inquiry.

2) Exact recommend of our machine for the job you do.

3) Detail information of our products, and our company if you need.

4) Best quotation.

5) Immediate answers to your questions about our produts.

6) Technical support, or alternative accessories if necessary.

FAQ:

1.

Q:Are you a factory or trading company?

A:We are manufacturer.

2.

Q:How to start the business?

A:We recommend you our product according to your requirement, if you are satisfied with that, then you make a trail order or sample order to check the quality, if all ok, you can place an order then.

3.

Q:How to Choose the System Voltage ?

A: We can design the heater element for 12v or 24v tubular heater or 220-380V for normal tubular heating eleemnt.

4.

Q: have your sale team and service team for you company? A: Yes, we have sales team and service team, also we have technology D&R team, for service our clients

Shenzhen Suwaie Technology Co., Ltd. Focus on the production of Flat Hot Coil Heater. Our company has professional equipment and engineers to provide the production and service of Flat Hot Coil Heater.

Hot Tags: flat hot coil heater, China, manufacturers, suppliers, factory, customized, Coil Heater with Thermocouple Type K, Mini Micro Hot Runner Coil Heater, Straight Hot Runner Coil Heater, Small Heating Coil, Mini Hot Runner Heating Coil for Mold, Hot Runner System Coil Heater