High Density Cartridge Immersion Heater

It is important to note that allowable watt density depends on the material being heated. For water heating watt densities of several hundred watts per square inch are possible while oil heating may be limited to 5—to 20 watts per square inch.

Replaceable Immersion Cartridge Heaters futures:

1. Clean and safe.

2. Heater never comes into contact with tank contents.

3. Easily replaced without draining the vat or tank.

4. Suwaie immersion cartridge heater contracts when de-energized for easy removal.

5. Stainless-steel sheath accommodates standard diameter flanged Suwaie immersion cartridge heaters from 5" to 72" lengths.

6. Solid Construction. Stainless steel sheath with a welded end cap and NPT fitting that screws into and becomes a permanent part of the tank or vat to be heated

High Density Cartridge Immersion Heater Structures:

Stainless steel flange welded directly to heater sheath. Fiberglass insulated leadwires are the standard. Other flange sizes and hole patterns are available upon request.

Introduction of leakage of Cartridge rod heater and solution:

The reason

1. The ground wire is not connected;

2. Electrical heating tube insulation damage (this may be the problem of insulating magnesium oxide powder, or joint insulation problems);

3. The electric heating tube burns out and the cup body is short-circuited;

4. Improper cleaning, the water hits the terminal of the stainless steel electric heating pipe;

5. The circuit wire falls off and the cup body collides;

6. There is too much dirt on the electric socket or power plug;

7. The water quality is too bad, and the water pollution is serious;

Products show

Application:

Process and test room show

Packing and shipment case show:

Why choose US?

1. Bureau veritas audited supplier

2. Strict confidentiality for customers

3. Have a strong product development capabilities!

4. We have Longterm cooperation forwarders to ensure the quick and safe shipment, avoid goods delay and extra cost.

5. Solve problems for customers in time

6. Good Payment terms and Reasonable price

7. Excellent after-sales service and feedback

8. Potential problems in product handling

9. We can provide installation video and instructions.

FAQ

1. Q: How do I know about the production?

A: We will double confirm your requirements and send you the sample before the mass production.

During the mass production, we will keep you informed of any progress. Besides, we will do 100% quality inspection before shipment.

2. Q: What about the payment terms?

A: 50% T/T deposit before production, 50% T/T balance before shipment.

3. Q: How do you make our business long-term and good relationship?

A: 1) We keep good quality and competitive price to ensure our customers benefit ;

2) We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Hot Tags: high density cartridge immersion heater, China, manufacturers, suppliers, factory, customized