Gas tank silicone rubber heater strip
1. Description:
Gas tanks have good waterproof performance in the tropical zone. They can be used for industrial equipment or laboratory pipes in humid, non-explosive gas places. The tanks and tanks can be heated, traced, and insulated. They can be directly wound on the surface of the heated part for easy installation ,Safe and reliable.
2. Structural performance:
(1) The product is mainly composed of nickel-chromium alloy wire and insulating material. It has fast heating, high thermal efficiency and long service life.
(2) The heating wire is wound on the alkali-free glass fiber core frame. The main insulation is silicon rubber, which has good heat resistance and reliable insulation performance.
(3) The product has excellent softness, can be directly wound on the device to be heated, and has good contact and uniform heating.
3. Features:
Maximum heat-resistant temperature of insulation material: 250 ℃ Recommended temperature: <200 ℃ Insulation resistance:> 50MΩ Dielectric strength: ~ 1500V 1 min Power deviation: ± 10%
4. Product application and precautions:
Gas tank heating cable is a kind of special soft heating belt with fixed length. It is designed to have high power density. Therefore, it can be used in places where heating is needed in addition to the heating of general constant power belt.
5. Pay attention when using:
(1) During installation, the flat side of the silicone rubber of the heating cable should be close to the surface of the medium pipe and tank, and fixed with aluminum tape.
(2) In order to reduce heat loss, a heat insulation layer should be measured outside the electric heating belt.
(3) It is strictly forbidden to overlap winding installation to prevent overheating damage.
Can also be customized according to user requirements (specifications, sizes), and dielectric strength of high voltage withstand ~ 20000V / min