Introduction of high-temperature furnace heat treatment equipment for explosion-proof heater
The explosion-proof heater needs to be in contact with the high-temperature furnace heat treatment equipment. This article has not been introduced before. Maybe the customers do not know very well. Let's see how to maintain the high-temperature furnace heat treatment equipment. It is usually collected after use. Do not keep it in a high-temperature area, and because it is a high-temperature item, you need to wear gloves when using it. If you accidentally touch it, you need to use clean water to treat it. , Then use calcium gluconate plus 2% water, rub the abrasion area for 15 seconds;
If the product is faulty, remember to deal with it immediately. Of course, this is the same for any machine. If there is a fault, you need to deal with it quickly. In order to avoid the impact of subsequent errors.
Electric heaters are more and more widely used in the industrial field, such as petroleum, machinery, chemical industry, printing and dyeing, ships, electricity and other occupations, an efficient and energy-saving heating, heating, and viscosity reduction equipment, which replaces traditional fuel oil , Coal burning, steam heating and other methods. However, this type of electric heater will show different problems during operation, so if you want to deal with the problem in a timely manner and let it operate normally, you must be familiar with the operation principle of this type of electric heater. Usually divided into direct resistance heating and indirect resistance heating.
