Principle use of silicone rubber heater
The principle of use of silicone rubber heater
The silicone rubber heater is a kind of silicone heating belt. It mainly utilizes the softness and flexibility of the silicone heating belt. The metal buckle is riveted on the reserved holes on both sides of the heating belt, and then the spring is buckled on the barrel. , pipe or tank to complete the heating work.
The silicone rubber heater is easy to install, and the silicone rubber heating belt can be closely attached to the surface of the heated object, and has the characteristics of rapid heating and high thermal efficiency. The heating belt of the oil drum can heat and soften the liquid and solidified matter in the barrel by heating, and the barrel is heated by the adhesive, tar, oil, paraffin, paint, oil and various resin materials in the barrel. And make it lower its viscosity. Silicone rubber heaters are used throughout the year regardless of the season.
Silicone rubber heaters can be used for heating, heat tracing and heat preservation of various tanks, pipes and barrels. They can be wound directly onto the surface of objects to be heated, which is convenient and quick to install and disassemble.
When doing this work, workers often come into contact with equipment and metal parts, so it is necessary to carefully grasp the safety technology to avoid accidents.
(1) The main heating equipment for the heat treatment process. The main equipment in the heat treatment process is a heating furnace, which can be divided into two major categories of electric furnaces for fuel furnaces.
1. Fuel furnace. Combustion of solids, liquids, and gases produces heat sources such as coal stoves, oil furnaces, and gas stoves. They rely on the heat energy directly emitted by combustion. Most of them are primary energy sources. They are economical and low in consumption, but they are easy to decarburize and oxidize the surface of the workpiece. It is commonly used in general heat treatment of workpieces and materials such as tempering, normalizing, annealing and quenching.
2. Electric furnace. Electricity is used as thermal energy, that is, secondary energy. According to different heating methods, it is divided into electric resistance furnace and induction furnace. Depending on the heating of the workpiece and the material, different forms of electric heating furnaces should be provided according to the process requirements.

