Steps for normal production of air heater
The frequency of using air heaters in life is getting higher and higher, so if more things are sold, you need to put it into production. What are the normal production steps of raw water heaters?
Contact the boiler-start the raw water pump-release the air door-close the air door-the water side outlet door-adjust the pressure-warm body-raw steam side-complete.
Has been produced, it needs to know how to operate when it is running, see its operation application guide?
1. Check on-site power supply
2. Put the workpiece to be heated horizontally or vertically into the heater
3. Connect one end of the temperature measuring wire to the jack above the power switch. The two feet of the temperature measuring wire are of a size.
4. After adjusting the temperature or time required for the installation of the electric heater work piece, press the START / STOP key, it will automatically stop after reaching the set temperature or time, and there will be a prompt sound. START / STOP button.
There are still a few details, so I won't say more details here.
