Teflon heater is a new type of electric heating element resistant to strong corrosion, used for heating various corrosive liquids. It has excellent anti-aging properties and good flexural properties, and is designed with low surface load. The joint adopts fully enclosed acid and alkali proof, non-heating section and overheating safety protection system are completely customized according to customer's needs. Perfectly guaranteed that the heater is not easy to burn, long service life, full sealing, no corrosion, no leakage, with grounding protection, safe and reliable. The applicable temperature is below 110 °C. (heating in a very thick liquid, stirring must be configured)
Mosquito-type anti-corrosion Teflon PTFE heater has the advantages of high thermal efficiency, energy saving, high cost performance, and can be designed in various structural forms, such as spiral type, L type, U type, W type, mosquito coil type, combination type and the like. It has been recognized by many listed companies as a long-term supplier of mosquito-repellent Teflon electric heaters. We can undertake non-standard products, in terms of voltage, power, size and product shape, as well as wiring methods, engineers can design according to customer needs, welcome to map and sample production.
"L" type - anti-corrosion Teflon heater products:
1) Teflon electric heater is made of high quality stainless steel (sus316 or sus304) electric heating element core, made of Teflon tube (PTFE), strong corrosion resistance, suitable for all kinds of corrosive liquid heating.
2) The heater is designed with low surface power (1.5w/cm2) to ensure the service life of the product.
3) The installation position of the electric heater should be careful to prevent solids in the solution from depositing on the surface of the electric heater, or the liquid is too thick, and the liquid level is too low, the iron fluoride (PTFE) will be burnt due to poor surface heat dissipation.
4) The size of the electric heater should not be changed to a small size, and the surface area should be changed. Otherwise, the surface power of the electric heater will be too large, which will affect the service life of the electric heater.
5) All electric heaters can be equipped with over-temperature protection or PT-100 temperature probe to ensure product life and safety.
6) The joint adopts fully enclosed acid and alkali proof, non-heating section and overheating safety protection system are completely customized according to customer's requirements.
Spiral-anti-corrosion Teflon heater is suitable for heating various corrosive liquids. It is electroplating, electrolysis, degreasing, pickling, electroless nickel plating, anodizing, aluminum pouring, smelting, chemical, medicine, etc. The best choice for equipment!
The electric heating tube is a common electric heating tube element, which mainly appears as a metal tube, also called a heating tube or a heating tube. The outer tube of the electric tube mainly has a non-embroidered steel tube, a copper tube, and an iron tube. The electric heating pipe mainly comprises four parts: a heating wire, a metal pipe, a magnesium oxide powder, and a port.
As a traditional electric heating equipment, electric heating tube has the characteristics of simple structure, high mechanical strength, high thermal efficiency, safety and reliability, simple installation and long service life. The products are widely used in rubber machinery, plastic machinery, spraying equipment, food machinery, baking equipment, Electroplating equipment, electronic equipment, electrical equipment, air conditioning, wave soldering furnaces, microwave ovens, coffee makers, electric water heaters, ovens, heaters, and shoe machines.