After the carbon fiber quartz heater is energized, during frequent start-up, shutdown and long-term continuous operation, the power is stable within a certain tolerance range, and no instantaneous power impact will occur.
High thermal efficiency, more than 30% energy saving than general metal heating body, and extremely fast heating rate. Carbon fiber heating element is a pure black body material, so it has rapid heating, small thermal hysteresis, uniform heating, long distance of heat radiation transmission, fast heat exchange rate, etc. Features. During the working process, the luminous flux is much smaller than that of the metal heating element, and the electrothermal conversion efficiency is as high as 95% or more (that is, you use a 1000w ordinary heating tube and only 700w when using a carbon fiber heater).
The components should be stored in a dry place. If the insulation resistance is less than 1MΩ for a long time, it can be dried in an oven of about 200 °C. The heating pipe or the reduced voltage is energized and heated until the insulation resistance is restored.
The magnesium oxide powder at the outlet end of the heating pipe is protected from the infiltration of contaminants and moisture at the place of use to prevent leakage accidents.
With the increasing number of heating pipes and electric heating pipe enterprises, the competition of domestic heating pipe enterprises is also constantly upgrading. Nowadays, the scope of heating pipe enterprises must include market research, product development or improvement, manufacturing, sales, After-sales service until the whole process of recycling, involving the entire life cycle of the heat pipe products, always pay attention to the concept of serving customers all the way, all-round. Under the same product quality conditions, who can do more in the after-sales service, to a certain extent, determines who can win more market share. At the same time, whether it is to improve quality, increase prices, or adopt trade protection measures, take a diversified route, and increase the value-added road, all aim to enhance their influence and status in the heat pipe market.