What is the diameter of the vulcanizer tubular heating element and the diameter of the vulcanized electromechanical tubular heating element? The vulcanized electromechanical heat pipe is an electric heating element specially designed for the electric heating plate vulcanizing machine. The peak electric heating pipe provides the quotation of the vulcanized electromechanical heat pipe and the vulcanized electromechanical heat pipe.
The diameter of the vulcanized electromechanical heat pipe is generally between 14-20MM. Due to the strict requirements on the pipe diameter of the vulcanized electromechanical heat pipe, it is mainly the coordination problem between the vulcanized electromechanical heat pipe and the template aperture of the vulcanizer. Therefore, when designing the vulcanized electromechanical heat pipe, it is necessary to accurately grasp the size of the template aperture. If it is too large or too small, it will affect Installation or service life of vulcanized electromechanical tubular heater.
The vulcanized electromechanical heat pipe is an electric heating element specially designed for the electric heating vulcanizing machine. The flat vulcanizing machine is the main vulcanization equipment for rubber products. The surface temperature difference of the hot plate is the main performance index of the flat vulcanizing machine. There are two main reasons for the large temperature difference on the surface of the hot plate: 1. The influence of external environmental temperature; 2. Electric heating The spacing of the tubes is designed. Therefore, the key to solving the problem of the temperature difference between the hot plates of the electrothermal vulcanizer is to find out the relationship between the minimum temperature difference and the arrangement of the electric heating tubes.