Precautions for using defrost tubular heating element
Precautions for using defrost tubular heating element
1. The components should be stored outside of the dry. If the insulation resistance drops below 1 megohm due to long-term storage, it can be dried in an oven at about 200 ° C for several hours (or pass the component under low pressure for several hours), or the insulation can be restored resistance.
2. When carbon is found on the surface of the tube, it must be removed and reused, so as not to reduce the efficiency or even burn out the components.
3. When melting asphalt, paraffin and other solid oils, reduce the voltage and use it, and then raise it to the rated voltage after melting. To prevent battery concentration from reducing component life
Technical parameters of double-headed U-shaped defrosting tubular heating element
1. Diameter of electric heating tubular element: Φ5.5 ~ Φ30
2. Electric heating tubular heating element: SUS201, SUS304, SUS321, SUS316L, SUS310S, stainless steel scale coating, titanium
3. Input power and power: customized as required
4. Length of electric heating tube: customized as required
Development prospects of tubular heating element
Electric heating equipment with electric heating element as the main cause of energy saving and environmental protection has gradually replaced the traditional combustion heating. Against the background of green development, it will usher in a good development prospect. As a manufacturer of electric heating tubular, Suwaie believes that current electric heating companies should actively impact the high-end market.
Civilian electric heaters are often standard parts with relatively low unit value but large batch sizes. The industrial fields mainly include polysilicon production, oil and gas extraction, petrochemical and other fields. Electric heaters used in industrial fields are often part of industrial production systems and are non-standard parts. They have high performance requirements and relatively high unit values and profits.